Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: sheet numbering conventions

[Subject Prev][Subject Next][Thread Prev][Thread Next]
This GSA CAD Standards thing is interesting, if not
totally useful.

http://www.gsa.gov/gsa/cm_attachments/GSA_DOCUMENT/CAD_standards_R2NY1-k_0Z5RDZ-i34K-pR.pdf

There is this table on page 17 which looks like other
numbering systems I've seen:

Sheet Type Designators
0 General (symbols, legends, notes, etc.)
1 Plans (horizontal views)
2 Elevations (vertical views)
3 Sections (sectional views)
4 Large Scale Views (plans, elevations, or sections
that are not details)
5 Details
6 Schedules and Diagrams
7 User Defined
8 User Defined
9 3D Representations (isometrics, perspectives,
photographs)

HTH
Mark Johnson PE


******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********