Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: STEEL: Connection Design Software

[Subject Prev][Subject Next][Thread Prev][Thread Next]
 
I'd be interested in hearing from others that have used RAM Advanse for
steel connection design. I recently had RAM Advanse loaded on my
computer but have not yet used it.  My copy does appear to include the
Steel Connection software.  

It appears to me that the steel connection design is performed on joints
from the structural model and analysis in RAM Advanse; i.e., it does not
appear to be possible to design a connection independently using
external load applications? 

Bill Sherman
CH2M HILL / DEN 
720-286-2792 

-----Original Message-----
From: Mark Deardorff [mailto:mark(--nospam--at)rstavares.com] 
Sent: Tuesday, September 18, 2007 2:34 PM
To: seaint(--nospam--at)seaint.org
Subject: RE: STEEL: Connection Design Software

Ram makes an add-on for Advanse that does connections. 

Mark E. Deardorff, SE
R & S Tavares Associates, Inc
9815 Carroll Canyon Road
Suite 206
San Diego, CA 92131
Phone: 858-444-3344
Phone: 209-863-8928
mark(--nospam--at)rstavares.com
www.rstavares.com


******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********