Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: no. of anchor bolts

[Subject Prev][Subject Next][Thread Prev][Thread Next]

Scott –

 

I’ve often wondered about this.

 

What if the column is braced during construction? Does this satisfy the requirement?

 

T. William (Bill) Allen, S.E.

ALLEN DESIGNS

Consulting Structural Engineers
 
V (949) 248-8588 F(949) 209-2509

-----Original Message-----
From: Scott, William N [mailto:William.N.Scott(--nospam--at)conocophillips.com]
Sent: Wednesday, September 26, 2007 10:06 AM
To:
seaint(--nospam--at)seaint.org
Subject: RE: no. of anchor bolts

 

2 bolts does not conform to 29CFR1926.755. You could assemble the stair tower and lift it into place as an alternate to save 8 inexpensive anchor bolts to rent an expensive crane.

 

Bill

 


From: Micayas, Julius [mailto:jmicayas(--nospam--at)riverconsulting.com]
Sent: Wednesday, September 26, 2007 8:51 AM
To: seaint(--nospam--at)seaint.org
Subject: no. of anchor bolts

Due to some clearance problem we are inclined to provide two anchor bolts instead of four for our stair tower base plate. The load or the capacity is not an issue, two-bolt is adequate. My only concerned was back in 1999 when I did a retrofit project they told me that 2-anchor bolts is no longer acceptable (i.e. for construction safety…)

 

I’d like to know what part or chapter this be that deprive me to do so.

 

Thanks

 

Engr. Julius Micayas

P.E. license no.32969

Senior Lead Structural Engineer

Phone - 504-841-3014 (direct)

504 837-5275 (office)

Fax - 504-837-2986