Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: Both face should have Shrinkage Steel in 12 inch thick Structural Slab (ACI318)

[Subject Prev][Subject Next][Thread Prev][Thread Next]

Could you please elaborate the ACI context?

 

Best Regards,

Sanjay Kumar Verma,  P.E.

 

 

-----Original Message-----
From: bart(--nospam--at)nbse.com [mailto:bart(--nospam--at)nbse.com]
Sent
:
Thursday, October 11, 2007 1:52 PM
To: seaint(--nospam--at)seaint.org
Subject: Re: Both face should have Shrinkage Steel in 12 inch thick Structural Slab (ACI318)

 

it depends on whether it is 1 way or 2 way, you might want to read ACI 7.12

 

bart

----- Original Message -----
From: "Sanjay Verma"
To: seaint(--nospam--at)seaint.org
Subject: Both face should have Shrinkage Steel in 12 inch thick Structural Slab (ACI318)
Date: Thu, 11 Oct 2007 11:00:46 -0700

Should 12 inch thick Structural Slab receive temperature and Shrinkage steel in both face?

 

ACI350 says about 24 in section to receive double layer of Shrink/Temp.

 

ACI 318 appears silent on this.

 

Best Regards,

Sanjay Kumar Verma,  P.E.

 

 

Bart Needham, SE
Principal, nbse associates, inc.
civil & structural engineers
Office 206-780-6822
Office 805-452-8152
Fax    206-780-6683
Fax    208-693-3667
Mobile 206-300-2346
 
Office locations:
629 State Street #230
Santa Barbara, CA  93101
 
205 Fairview Lane
Suite 100
Paso Robles, CA  93446
 
365 Ericksen Ave. NE
Suite 328
Bainbridge Island, WA  98110
 
Mail and Deliveries:
321 High School Rd. NE
Suite D-3 PMB 216
Bainbridge Island, WA  98110