Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: ASCE 7-08

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Syed,

        I agree; and if anything important comes up in between they can always issue an addendum.

Regards,

H. Daryl Richardson
  ----- Original Message ----- 
  From: sam2000 . (sam2000) 
  To: seaint(--nospam--at)seaint.org 
  Sent: Wednesday, January 23, 2008 1:43 AM
  Subject: Re: ASCE 7-08


  And there should be at least five years between one cycle and the next. 

  Is this too much to dream?

  Syed A Masroor 
  Consulting Structural Engineer 
  Karachi, Pakistan




  ----- Original Message ----- 

  From: Scott Maxwell <smaxwell(--nospam--at)umich.edu> 

  Date: Tuesday, January 22, 2008 7:21 am 

  Subject: Re: ASCE 7-08 


  > You are correct that ASCE 7 will next be out in 2010, but I  
  > believe they are 
  > going to a 6 year cycle.  They are doing a 5 year cycle this time  
  > to get it 
  > on the right timing.  The intent is to have ASCE 7 be one year  
  > ahead of the 
  > material standards and two years ahead of the IBC cycle. 
  >  
  > Regards, 
  >  
  > Scott 
  > Adrian, MI 
  >  
  >  
  > On 1/21/08 7:02 PM, "Tom Skaggs" <tom.skaggs(--nospam--at)apawood.org> wrote: 
  >  
  > > 2010.  ASCE 7 is now on a five year cycle. 
  > >   
  > > Tom 
  > >   
  > >  
  > > From: Garner, Robert [mailto:rgarner(--nospam--at)moffattnichol.com] 
  > > Sent: Monday, January 21, 2008 15:56 
  > > To: seaint(--nospam--at)seaint.org 
  > > Subject: ASCE 7-08 
  > >   
  > > Does anyone know when ASCE 7-08 will be available.  I've asked  
  > the ASCE 
  > > website but that can be a black hole. 
  > >   
  > > Thanks. 
  > >   
  > >   
  > > Bob 
  > >   
  > > R. Garner 
  > > Moffatt & Nichol 
  > > Tel.: (619) 220-6050 
  > > Fax.: (619) 220-6055 
  > > e-mail: rgarner(--nospam--at)moffattnichol.com 
  > >   
  > >  
  >  
  >  
  >  ******* ****** ******* ******** ******* ******* ******* *** * Read list FAQ at: http://www.seaint.org/list_FAQ.asp * * This email was sent to you via Structural Engineers * Association of Southern California (SEAOSC) server. To * subscribe (no fee) or UnSubscribe, please go to: * * http://www.seaint.org/sealist1.asp * * Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you * send to the list is public domain and may be re-posted * without your permission. Make sure you visit our web * site at: http://www.seaint.org ******* ****** ****** ****** ******* ****** ****** ********