Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: ASCE 7-05 Wind Forces

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Not sure why this didn't make it through last time.

I put up an example here:

http://www.examplecalcs.com/story.php?title=Sample_Wind_Calculations_-_ASCE_7-05

On Jan 27, 2008 1:46 PM,  <ASLCSE(--nospam--at)aol.com> wrote:
>
>
>
> In a message dated 1/27/2008 1:39:15 PM Pacific Standard Time,
> smaxwell(--nospam--at)umich.edu writes:
>
> Yes...the intent is to add an additional wind load "case" that has a 10 psf
> pressure on all surfaces.  Thus, you calculate wind pressures per the
> provisions that has different pressures for different surfaces...that is
> wind "case 1".  And then also check 10 psf on all surfaces as "case 2".
>
> Regards,
>
> Scott
> Adrian, MI
>
> That is what I assumed and was hoping for.
> Thanks Scott
> Tony
>
>
>
> ________________________________
> Start the year off right. Easy ways to stay in shape in the new year.

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********