Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: CONCRETE: Hot Base Plate Bearing on Concrete

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Tom.Hunt(--nospam--at) wrote:


I had to research a similar situation a few years ago and the answers and recommendations are not all consistent.  The classical answer is 200 degree F since this is just below when the entrapped water will turn to steam which is what you will find in PCA,
Thanks, Tom. I see that this wasn't exactly a "hot topic" here :-)

Turns out the ANSYS run showed the base plate would never get hotter than 120 deg. F, so we're "cool" ;-)
******* ****** ******* ******** ******* ******* ******* *** * Read list FAQ at: * * This email was sent to you via Structural Engineers * Association of Southern California (SEAOSC) server. To * subscribe (no fee) or UnSubscribe, please go to: * * * * Questions to seaint-ad(--nospam--at) Remember, any email you * send to the list is public domain and may be re-posted * without your permission. Make sure you visit our web * site at: ******* ****** ****** ****** ******* ****** ****** ********