Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: AISC minimum number of bolts

[Subject Prev][Subject Next][Thread Prev][Thread Next]
I'm not certain of an AISC requirement but the erector will want two holes, one
for drifting.

Dave

Quoting Drew Morris <dmorris(--nospam--at)bbfm.com>:

> I have a steel framed project with HSS wind girts.  I calced and drew 
> the girt to column connection with one bolt.  The steel detailer 
> mentioned that there is an AISC requirement for 2 bolts?  Does anyone 
> know if this exists and where it is located?  TIA
> 
> ******* ****** ******* ******** ******* ******* ******* ***
> *   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
> * 
> *   This email was sent to you via Structural Engineers 
> *   Association of Southern California (SEAOSC) server. To 
> *   subscribe (no fee) or UnSubscribe, please go to:
> *
> *   http://www.seaint.org/sealist1.asp
> *
> *   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
> *   send to the list is public domain and may be re-posted 
> *   without your permission. Make sure you visit our web 
> *   site at: http://www.seaint.org 
> ******* ****** ****** ****** ******* ****** ****** ******** 
> 





******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********