Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: A325 Bolts

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Harold and Drew,
 
Thanks for your reply.
 
Harold, the temperature is about minus 70 degrees F.
 
ASQuilala
 
 
 
 


----- Original Message ----
From: Harold Sprague <spraguehope(--nospam--at)hotmail.com>
To: seaint(--nospam--at)seaint.org
Sent: Friday, May 2, 2008 12:29:04 PM
Subject: RE: A325 Bolts

I guess, I would have to ask for definition sub zero.  Minus 10 degrees F is sub zero, but so is minus 270 degrees F.  A 325 bolts are commonly used in bridges in very cold climates where the temperature gets down to minus 20 degrees and even colder. 
 
The A320 does not get excited until you are below 100 degrees F.  The record low in Fairbanks, AK is minus 66 degrees F. 
 
The issue with cold temperatures and steel is how brittle the steel becomes.  If you are tensioning the bolts, the brittleness of the steel should not be an issue. 

Regards,
Harold Sprague



Date: Fri, 2 May 2008 09:55:11 -0700
From: asqengg2(--nospam--at)yahoo.com
Subject: A325 Bolts
To: seaint(--nospam--at)seaint.org

We are working in subzero temp and instead of A320 bolts for exterior application, we are planning to use A325 instead.  How much capacity reduction we are going to use for using A325 in such an environment?
 
Thanks in advance.
 
Cairo


Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.


With Windows Live for mobile, your contacts travel with you. Connect on the go.


Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.