Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: Stamping Calcs - designs

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Michel,

If it's a construction drawing it needs to be stamped. If you paste it
on larger sheets you'll have fewer sheets to stamp.

Dave Gaines

-----Original Message-----
From: Michel Blangy [mailto:mblangy(--nospam--at)satco-inc.com] 
Sent: Friday, May 16, 2008 10:29 AM
To: seaint(--nospam--at)seaint.org
Subject: RE: Stamping Calcs

Hi Terry,

I posted an amendment to my initial post. The project is for site
retaining walls. Seems the PCer wants my detail sketchs and spec sheets
stamped as they will be used for construction and separate from the
approved drawing set.

Michel Blangy, P.E.

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********