Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Diaphragm Chord Wood Truss Roof

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Hi Rich:
 
Difficult problem.
 
The chord needs to be at the diaphragm, and the diaphragm is supported by wood trusses. 
 
An option is to switch to top chord bearing for your wood roof trusses.  This would allow you to use your conventional chords at the top plate level.  You would be looking at forming the parapet on top of the roof plywood using separate bracing, rather than having the truss folks include the parapet as part of the truss. 
 
This option would be conventional, easy to review, and easy to bid, and easy to get a permit.
 
Another approach may work.  It's unconventional You can keep the bottom chord truss bearing.  You may want to consider using fiber wrap (FRP).  Using several FRP layers on top of the plywood along the  edges of the plywood diaphragm would add the tensile capacity you need.  It would not interfere with the wood trusses, and would not be a huge waterproofing problem.  You may have blocking  for edge nailing on the edge of the plywood between the trusses.
 
Regards,
IDS Group Inc.
Bob Freeman, AIA, EIT
(949) 387-8500