Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: Steel Pipe fabrication & Galvanizing Specifications

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Good info, Tom.  Thanks.

On Thu, Jul 17, 2008 at 9:15 AM, <Tom.Hunt(--nospam--at)> wrote:


I assume you are using the pipe in a structural application as opposed to a pressure or gravity flow pipe situation.  If so, then the fabrication would still fall under the AISC requirements which would be AISC 360 for the design and AISC 303 for the fabrication and erection.  Galvanizing for the main pipe sections would fall under ASTM A123 and if you have small parts and loose connection pieces that would fall under ASTM A153.  If you are using the pipe to transmit liquids then you may be in the ASME world.

Thomas Hunt, S.E.

"Nittsi" <nitin26nagar(--nospam--at)>
07/17/2008 08:53 AM
Please respond to seaint
Steel Pipe fabrication & Galvanizing Specifications

Dear All,

Can Anybody provide code for Steel pipe Fabrication and galvenizing.

Thanks for your coperation in Advance.

Nitin nagar    
Rediff Shopping

The information transmitted is intended only for the person 
or entity to which it is addressed and may contain 
proprietary, business-confidential and/or privileged material.  
If you are not the intended recipient of this message you are 
hereby notified that any use, review, retransmission, dissemination, 
distribution, reproduction or any action taken in reliance upon 
this message is prohibited. If you received this in error, please 
contact the sender and delete the material from any computer.  

Any views expressed in this message are those of the individual 
sender and may not necessarily reflect the views of the company.  

David Topete, SE