Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Concrete additives for Pool on roof?

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Hello,

I know that this is a bit non-typical, but I'm wanting to
find an additive that can be put in the concrete mix
that will make the concrete less pervious to water.

Does anyone know of a good additive that will keep the
water from moving through the concrete.  We're using
a high strength mix and water stops at the cold joint between
the floor/roof and the walls.  We are looking at using a liner or
a surficial spray on the inside of the pool, or an admix.

I was hoping that with a high strength mix, water stops, and 
a good admixture, that we wouldn't have a high maintenance
situation.

Any tips?

Thanks,
Lloyd


******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********