Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: Rock Veneer Support on timber

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Thanks to David, David and Buddy,
I will look into the link from Buddy.  I didn't think there was any more
restrictions, however you never know with this code where some little
paragraph can be hidden.
Joe

-----Original Message-----
From: Showalter, Buddy [mailto:Buddy_Showalter(--nospam--at)afandpa.org] On Behalf Of AWC
Info
Sent: Thursday, September 04, 2008 5:57 AM
To: seaint(--nospam--at)seaint.org
Subject: Rock Veneer Support on timber

No other restrictions of which I am aware. However, there's some
additional information on deflection criteria for stud walls backing
veneers in a recent Structure Magazine article by the list's own Harold
Sprague:

http://www.structuremag.org/article.aspx?articleID=671

btw, this article resulted from a discussion on this listserver that
Harold so eloquently answered that we turned it into an article.

HTH

Buddy

John "Buddy" Showalter, P.E. 
Director, Technical Media 
AF&PA/American Wood Council 
1111 19th Street, NW, Suite 800 
Washington, DC 20036 
P: 202-463-2769 
F: 202-463-2791 
http://www.awc.org 
The American Wood Council (AWC) is the wood products division of the
American Forest & Paper Association (AF&PA). AWC develops
internationally recognized standards for wood design and construction.
Its efforts with building codes and standards, engineering and research,
and technology transfer ensure proper application for engineered and
traditional wood products.
********************* 
The guidance provided herein is not a formal interpretation of any AF&PA
standard.  Interpretations of AF&PA standards are only available through
a formal process outlined in AF&PA's standards development procedures.
********************* 

From: "Joseph R. Grill" <jrgrill(--nospam--at)cableone.net>
To: <seaint(--nospam--at)seaint.org>
Subject: Rock Veneer Support on timber

I have a situation where I have an exterior stud wall that is covered
with rock veneer. The wall has a low parapet, just a couple of feet
above the roof, where the veneer will also be located on the interior
face of the parapet. I can't find anything in the IBC that would tell me
I can't support the small height of rock veneer, on the interior of the
parapet, by a ledger of some sort, which will be attached to the stud
wall. 2304.12 tells me that I have to check the wood members for long
term deflection. Is there any restrictions that I haven't found?
Thanks,
Joe Grill

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ******** 


******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********