Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Deletion of ASTM F1642 Airblast Testing from USGS Specs

[Subject Prev][Subject Next][Thread Prev][Thread Next]

The option to use Airblast test results per ASTM F1642 to verify a window’s adequacy for meeting UFC 4-010-01 antiterrorism requirements has been deleted from the latest versions of USGS window guide specifications.  The only option now is to perform a design analysis with calculations.  Why has the airblast paragraph been deleted?


There were many problems associated with using the airblast tests to approve a window system.  For example, the size of the tested window had to be within +10%/-25% of the window size used on the project, or additional testing was required.  The tested charge weight and standoff rarely matched project requirements.  The pressure may have met the spec but impulse did not.  Often the test results were not clear as to what type of connections to the supporting structure and their spacings were used.  Clearing effects occur around a test apparatus that do not occur on a window installed in an actual building wall. 


Were any of these problems the reason that the airblast option was eliminated, or is there a different reason?



David Dickey, PE

Lexington, KY