Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: Adjustment Factors Cd for timber column

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Wesley,
Thanks I wondered about that, we have 6.0.20 - just  bother to update as we have to get IS to come do it
Paul

>>> "Wesley Werner" <wwerner(--nospam--at)conewago.com> 02/05/2009 3:43 PM >>>
Paul,
 
    What version of EC 6 are you using? The latest update is 6.0.21. I have this version, and I can't duplicate your problem.
 

Wesley C. Werner


 


From: Paul Guthrie [mailto:PGuthrie(--nospam--at)simivalley.org]
Sent: Thursday, February 05, 2009 5:12 PM
To: seaint(--nospam--at)seaint.org
Subject: RE: Adjustment Factors Cd for timber column

Gordon,
 
Yeah, we found those but for example the 1.25 applies only to the Lr not to the combination.  We gave up, I used one of my spreadsheet models (used to do everything on those!), and did a hand check.
 
Ps: on another front, when we changed the loads input to "Tributary Area" - the allowable bending stress increased?  Can't figure that one out!
 
Thanks,
Paul Guthrie

>>> "Gordon Goodell" <GordonGoodell(--nospam--at)harmonydesigninc.com> 02/05/2009 1:06 PM >>>

Paul,

There  is a column for Cd factors on the load combination tab in both the wood beam and column modules.

regards,

Gordon Goodell

 

From: Paul Guthrie [mailto:PGuthrie(--nospam--at)simivalley.org]
Sent: Thursday, February 05, 2009 1:01 PM
To: seaint(--nospam--at)seaint.org
Subject: RE: Adjustment Factors Cd for timber column

 

EC 6

>>> "Gordon Goodell" <GordonGoodell(--nospam--at)harmonydesigninc.com> 02/05/2009 10:21 AM >>>

Are you using EC5 or 6?

Gordon Goodell

 

From: Paul Guthrie [mailto:PGuthrie(--nospam--at)simivalley.org]
Sent: Thursday, February 05, 2009 10:51 AM
To: seaint(--nospam--at)seaint.org
Subject: RE: Adjustment Factors Cd for timber column

 

My question is regarding EnerCalc: "For wood beam design we are unable to locate the input location for CD, load duration factor

 

Paul