Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Rebar pull test

[Subject Prev][Subject Next][Thread Prev][Thread Next]
I have some #11 rebar dowels set in
concrete piers.  The contractor has
reason to believe that they did not get
fully developed and wants a pull test.
I don't have access to the design
tension load.  What load will I need to
have a testing agency apply to satisfy
requirements?
Any ideas what agency might do this type
of test (Dallas area)?  Your typical
concrete lab doesn't do this.

Jerry D. Coombs 


******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********