Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: Post-Installed Threaded Insert

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Can you remove and re-install the threaded rod that the HDI accepts or does it need the bolt to be permanent to create the wedging and bond with the concrete.

The HDI looked like it had smooth walls so it seemed to rely on the threaded rod to be installed to create the holding force.

I need something that can be reinstalled several times while leaving the insert in-place.

-gm

On Wed, Mar 11, 2009 at 9:50 AM, <Dick_Roberts(--nospam--at)oxy.com> wrote:

Yes – you drill a hole and use a setting tool to drive them in.

 

Richard Roberts

Occidental Chemical Corp.

Niagara Falls, NY

(716)278-7147

 dick_roberts(--nospam--at)oxy.com

 


From: Gerard Madden, SE [mailto:gmse4603(--nospam--at)gmail.com]
Sent: Wednesday, March 11, 2009 12:48 PM
To: seaint(--nospam--at)seaint.org
Subject: Re: Post-Installed Threaded Insert

 

Dick,

Can the HDI's be installed into existing concrete? They looked like they were embeds in before the concrete is poured.

-gm

On Wed, Mar 11, 2009 at 9:45 AM, <Dick_Roberts(--nospam--at)oxy.com> wrote:

Hilti HDI & HDI_L drop-in anchors

 

Richard Roberts

Occidental Chemical Corp.

Niagara Falls, NY

(716)278-7147

 dick_roberts(--nospam--at)oxy.com

 


From: Gerard Madden, SE [mailto:gmse4603(--nospam--at)gmail.com]
Sent: Wednesday, March 11, 2009 12:28 PM


To: seaint(--nospam--at)seaint.org
Subject: Post-Installed Threaded Insert

 

Anyone out there know of a post-installed concrete insert that has internal threads that would allow for an all-thread rod to be threaded in?



Similar to a ferrule or burke insert only it's drilled in to existing concrete?

TIA,
-gm