Need a book? Engineering books recommendations...
Re: PDFs[Subject Prev][Subject Next][Thread Prev][Thread Next]
- To: seaint(--nospam--at)seaint.org
- Subject: Re: PDFs
- From: "Gerard Madden, SE" <gmse4603(--nospam--at)gmail.com>
- Date: Thu, 14 May 2009 16:50:16 -0700
I use Bluebeam daily to minimize meetings with architects. It's a great program.
I can fix minor problems before plotting instead of touching up with whiteout etc..
Great for shop drawings, schematic and DD phases for exchanging ideas between disciplines...built it drafting symbols, hatching, shading etc...
I'm using Bluebeam as well, and love it. Great for marking up shop drawings too (no need to transfer marks to 5 sets, etc.)Tripp
--On 5/14/09, jrgrill(--nospam--at)cableone.net <jrgrill(--nospam--at)cableone.net> wrote:I solved this by purchasing Bluebeam. May never have to use Adobe again. Not free, but I like it.
Sent from my Verizon Wireless BlackBerry
From: "Adair, Joel"
Date: Thu, 14 May 2009 16:56:10 -0500
Subject: RE: PDFs
Your problem below is exactly why I use the free Brava! Reader – complete control over the printed scale, print region, etc.
Christopher Wright P.E. wrote:
<<Again, I'm a Mac user which is the context for all this. If I want to
scale a drawing I use the Page Set-up menu selection to scale it to
my heart's content. That's what I'd call printing to scale. I've
never noticed if I can scale the hard copy with a ruler or some sort,
but that's never been an issue for me. If someone else wants to scale
my printed hard copy, too bad. They should use the specified
dimensioning. Over here on engineering's dark side, scaling drawings
is considered bad taste.>>
Maybe it’s a Mac thing. I can’t find a page set-up menu.
All I want, bad taste or not, is to print the D sheets I get from architects at 1/8” scale (usually) on 11x17. I’m sick of having D sheets all over my desk. But Acrobat will not print at 50%. It only prints “fit to page,” which is about 44 - 47% when reducing 24x36 to 11x17. I don’t need to be terribly accurate, but I want to scale areas for wind loading, trib, etc quickly...directly off 11x17 with my trusty scale.
I use the CutePdf writer when I make .pdfs, and I can make them to any scale, but once they’re created I don’t know how to use CutePdf to plot at some other scale. For example, my deliverables are usually D sheets, but for my files and for site visits I want the same thing at 50% on 11x17. I’ve been using an Acrobat plug-in called Mapsoft Content Scaler, with which I can scale the entire .pdf and save it as a new file, but I have to scale, then crop white space, ... It’s a pain. This all seems like it should be much simpler; that’s why I’m convinced I must be missing something.
Thanks for your thoughts, all of you .pdf users.
This e-mail transmission is intended only for the use of the individual or entity named above and may contain information that is confidential, privileged, and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any review, disclosure, copying, distribution, or other use of any of the information contained in this transmission is strictly prohibited. If you have received this transmission in error, please immediately notify the sender by e-mail at the above address and delete it from your computer system; you should not copy the message or disclose its contents to anyone. The content of the message and or attachments may not reflect the view and opinions of the originating company or any party it is representing.
- Prev by Subject: Re: PDFs
- Next by Subject: Re: PDFs
- Previous by thread: Re: PDFs
- Next by thread: Re: PDFs