Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: FREE STRUCTURAL DESIGN SOFTWARE

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Richard,
Yes. I hope somebody else will add their 2 cents worth as that's just my personal opinion.
Gary

Richard Calvert wrote:

Gary,

 

Is that when using the MS word module?  From the demo it seemed pretty simple, but then again demo’s are always a bit diluted…

 


From: Gary L. Hodgson and Assoc. [mailto:design(--nospam--at)hodgsoneng.ca]
Sent: Wednesday, June 03, 2009 7:45 AM
To: seaint(--nospam--at)seaint.org
Subject: Re: FREE STRUCTURAL DESIGN SOFTWARE

 

Nathan,
I can't comment on the free composite beam problem, but I have been using theit TEDDS calculation sheets for several years and like several of the pre-written problems, e.g. rolling loads, continuous beams , reinf conc columns and a few others.  However I find writing your own solutions tedious and error prone.
Gary

Nathan Petersen wrote:

I finally had a chance to download and try this composite beam software.    What’s the catch?   It has a good interface and there’s a lot of information available on their website to help you learn how to use it.   It seems like a quality piece of software - I’m just about to start using it on a project.   Can anyone else share their experiences? 

 

Thanks.

 

Nathan

 

 

From: Matthew Newton[mailto:matthew.newton(--nospam--at)cscworld.com]
Sent: Wednesday, April 15, 2009 10:07 AM
To: seaint(--nospam--at)seaint.org
Subject: FREE STRUCTURAL DESIGN SOFTWARE

 

 


Here's a great opportunity for every engineer in the USA to get some professional standard design software completely FREE.   In this tough climate, engineers deserve a good deal!

CSC is offering the internationally acclaimed composite beam design module absolutely FREE and without obligation.    You can download the software from the following link.

http://www.cscworld.com/fastrak/us/composite_download.html

Please feel free to distribute this link to friends and colleagues.    FASTRAK is rapidly becoming a worldwide standard for steel building design, and this FREE module provides a neat introduction to this high quality software.


Matthew Newton
CSC Inc

Phone:    (877) 710-2053

Fax:         (312) 321 6489

Direct:      (312) 233 2912

Email:     matthew.newton(--nospam--at)cscworld.com

Website:   www.cscworld.com

 

******* ****** ******* ******** ******* ******* ******* *** * Read list FAQ at: http://www.seaint.org/list_FAQ.asp * * This email was sent to you via Structural Engineers * Association of Southern California (SEAOSC) server. To * subscribe (no fee) or UnSubscribe, please go to: * * http://www.seaint.org/sealist1.asp * * Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you * send to the list is public domain and may be re-posted * without your permission. Make sure you visit our web * site at: http://www.seaint.org ******* ****** ****** ****** ******* ****** ****** ********
******* ****** ******* ******** ******* ******* ******* *** * Read list FAQ at: http://www.seaint.org/list_FAQ.asp * * This email was sent to you via Structural Engineers * Association of Southern California (SEAOSC) server. To * subscribe (no fee) or UnSubscribe, please go to: * * http://www.seaint.org/sealist1.asp * * Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you * send to the list is public domain and may be re-posted * without your permission. Make sure you visit our web * site at: http://www.seaint.org ******* ****** ****** ****** ******* ****** ****** ********