Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: Welding Base Plate to Grade 8 Bolt

[Subject Prev][Subject Next][Thread Prev][Thread Next]
You will loose the quenching and tempering properties of the Grade 8 bolt. 

Regards, Harold Sprague


From: h.d.richardson(--nospam--at)
To: seaint(--nospam--at)
Subject: Welding Base Plate to Grade 8 Bolt
Date: Tue, 21 Jul 2009 11:04:12 -0600

Fellow engineers,
        I have a client who wants to secure a base plate to a floor using Grade 8 bolts.  The intent is to have the threaded end down and epoxied into the floor; a leveling nut will be between the floor and the base plate to properly position the plate for grouting; the bolt head will be cut off the plate will be placed over top and welded to the bolts with some combination of plug and fillet welds through the anchor bolt holes.  The purpose is to have a flush surface with no protruding bolts or nuts.  The loads on the A-Bolts should be very small.
        My question is this: is the Grade 8 bolt material compatible with mild steel plate for welding purposes?
        I realize this is grossly over-designed; but, hey, it's the client's design and his money.  It's what he wants to do.
H. Daryl Richardson

Windows Live™ SkyDrive™: Store, access, and share your photos. See how.