Need a book? Engineering books recommendations...
RE: metal buildings[Subject Prev][Subject Next][Thread Prev][Thread Next]
- To: <seaint(--nospam--at)seaint.org>
- Subject: RE: metal buildings
- From: "Grathwol, Albert" <albert.grathwol(--nospam--at)aecom.com>
- Date: Fri, 31 Jul 2009 08:11:42 -0700
Title: metal buildings
From: Gordon Goodell [mailto:GordonGoodell(--nospam--at)harmonydesigninc.com]
Sent: Thursday, July 30, 2009 4:43 PM
Subject: metal buildings
I’ve got a large (100’x140’) pre-fab steel building for an ice rink that I’m doing the foundations for. It’s basically seven 3-hinged arches, 100’ wide. I just found out that the foundation has to be designed without a slab (which won’t be built maybe for years, until the budget allows). So I’ve got ~65 kips of out-thrust at the base of each column, and no opportunity for a hairpin into the slab. And the budget also does not allow at this time for the strip footing/stemwall to be built between the piers. So I told the client that he’s going to have to connect the base of each arch with a concrete/rebar tie underground, and he flipped out. This is a non-profit community effort to get covered ice here (which we all want), and the budget doesn’t appear to have an extra $50 in it, let alone what it would take to probably account for the foundation forces.
The steel building manufacturer is not interested in trying to resolve the horizontal force higher up; his steel sections will not handle a cable tie at eave level. Other than an abutment or a tension tie, I’m at a loss. Does anyone have other ideas for how to deal with this?
- metal buildings
- From: Gordon Goodell
- metal buildings
- Prev by Subject: Re: metal buildings
- Next by Subject: RE: metal buildings
- Previous by thread: Re: metal buildings
- Next by thread: Re: metal buildings