Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: seismic accelerations

[Subject Prev][Subject Next][Thread Prev][Thread Next]
have you verified that Enercalc has the correct values?

Michel Blangy wrote:
Enercalc has them all listed by zipcode. The list is sortable.
-----Original Message-----
From: Gerard Madden, SE [mailto:gmse4603(--nospam--at)gmail.com]
Sent: Wednesday, September 23, 2009 11:25 AM
To: seaint(--nospam--at)seaint.org
Subject: Re: seismic accelerations

Good. that way you can narrow down your search to the middle of the peak areas.

I guess you could also pay a local college engineering student a 100 bucks (beer money) to run the USGS program for every zip code in CA and give you a spread sheet with the summary.

-gm

On Wed, Sep 23, 2009 at 9:53 AM, SGE Structural <sgordin(--nospam--at)sgeconsulting.com> wrote:
Gerry,
 
I am doing that too.
The good news is that whatever it is in California, it is still remains less than in Sikestone MO (3.368/1.314)/
 
Thanks,
 
V. Steve Gordin, SE
Irvine CA
 
 
 
----- Original Message -----
Sent: Wednesday, September 23, 2009 09:01
Subject: Re: seismic accelerations

Might be easier just to look at the maps with the contour lines for the SS and S1.

-gm

On Wed, Sep 23, 2009 at 8:45 AM, SGE Structural <sgordin(--nospam--at)sgeconsulting.com> wrote:
Tom,
 
This is pretty much exactly what I am doing. 
Thanks,
 
V. Steve Gordin, SE
Irvine CA
----- Original Message -----
Sent: Wednesday, September 23, 2009 08:41
Subject: Re: seismic accelerations


Steve,

You might try going into Google Earth and get the latitude and longitude from various cities along the San Adreas Fault (and/or other major faults) then plug into the USGS seismic parameter program and see what you get.

Thomas Hunt, S.E.
Fluor




"SGE Structural" <sgordin(--nospam--at)sgeconsulting.com>
09/23/2009 08:05 AM
Please respond to seaint
To
<seaint(--nospam--at)seaint.org>
cc

Subject
seismic accelerations







Good morning,
 
Working on a project "generic" for entire State of California, and need to estimate the highest seismic load for a city in the state.
So far, the highest accelerations I found were in the City of Rancho Cucamonga (Ss=2.670, S1=0.968, higher than even in Richmond or Berkeley).
 
Is anybody aware of even higher values anywhere in the state?
 
Thanks,
 
V. Steve Gordin, SE
Irvine CA

 
 
------------------------------------------------------------
The information transmitted is intended only for the person 
or entity to which it is addressed and may contain 
proprietary, business-confidential and/or privileged material.  
If you are not the intended recipient of this message you are 
hereby notified that any use, review, retransmission, dissemination, 
distribution, reproduction or any action taken in reliance upon 
this message is prohibited. If you received this in error, please 
contact the sender and delete the material from any computer.  

Any views expressed in this message are those of the individual 
sender and may not necessarily reflect the views of the company.  
------------------------------------------------------------