Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: Mr.Liaqat

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Dear,

Thanks for invitation
and accepted with pleasure.
You can add me.

Keep in touch.

Regards,

On Sat, Nov 7, 2009 at 11:14 PM,  <ghan0022(--nospam--at)umn.edu> wrote:
> Dear Mr.Liaqat,
> My name is Naeem Ghani presently residing in Minneapolis, MN. I am also
> Structural Engineer. I was reading your blogs on the list and wanted to add
> you to my professional network if that is OK with you.
>
> Thanks,
> Naeem Ghani, P.E., LEED AP
> Cell: (763)843-3198
>
> On Nov 6 2009, Liaquat Ally Akhand wrote:
>
>> Dear,
>>
>> I worked with some transition/tapered beam. FP weld is alright, but
>> need to ensure that
>> the joint is 100% FP. The fit-up should be good with smooth surface,
>> root run should be could
>> and to be checked, Gouging on other sid after completing welding on
>> one side, sufficient scallop should be provided for good accessibility
>> and 100% MPI and UT.
>>
>> Sharp nothces should be ground off.
>>
>> Regards,
>>
>>
>> On Sat, Nov 7, 2009 at 1:38 AM, Larry Hauer <lhauer(--nospam--at)live.com> wrote:
>>>
>>> To All,
>>>
>>> I am working on a project where I need to span the floor beams 52 feet
>>> and
>>> at about half way thru the span the beam changes from being horzontally
>>> level to sloping at 1/8 or 1/4 inch per foot, (going from an interior
>>> space
>>> to an exterior deck). I assume a full pen weld at this transition will
>>> work,
>>> but are there concerns I am overlooking?
>>>
>>> Thanks in Advance,
>>>
>>> Larry Hauer, S.E.
>>>
>>> ________________________________
>>> Hotmail: Trusted email with Microsoft's powerful SPAM protection. Sign up
>>> now.
>>
>> ******* ****** ******* ******** ******* ******* ******* ***
>> *   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
>> * *   This email was sent to you via Structural Engineers *   Association
>> of Southern California (SEAOSC) server. To *   subscribe (no fee) or
>> UnSubscribe, please go to:
>> *
>> *   http://www.seaint.org/sealist1.asp
>> *
>> *   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you *   send to
>> the list is public domain and may be re-posted *   without your permission.
>> Make sure you visit our web *   site at: http://www.seaint.org *******
>> ****** ****** ****** ******* ****** ****** ********
>
> ******* ****** ******* ******** ******* ******* ******* ***
> *   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
> * *   This email was sent to you via Structural Engineers *   Association of
> Southern California (SEAOSC) server. To *   subscribe (no fee) or
> UnSubscribe, please go to:
> *
> *   http://www.seaint.org/sealist1.asp
> *
> *   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you *   send to
> the list is public domain and may be re-posted *   without your permission.
> Make sure you visit our web *   site at: http://www.seaint.org *******
> ****** ****** ****** ******* ****** ****** ********
>

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********