Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: Structural Studs Allowable Bending Moment

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Check out section C3.1.2 Lateral Torsional Buckling Strength from the North American Cold-Formed Steel Specification.  The following sections also discuss bracing with standing seam roofing and other similar methods.
Jim Wilson, PE
Stroudsburg, PA

From: "katy6827(--nospam--at)" <katy6827(--nospam--at)>
To: seaint(--nospam--at)
Sent: Tue, November 10, 2009 7:16:04 PM
Subject: Structural Studs Allowable Bending Moment

All the information I have found on Structural (S) Stud Sections in regards to the Allowable Bending Moment has stated that the tabulated values are for continuously supported members.  I am looking for information on the bending moment strength of members when they are not continuously supported.  Has anyone seen this information or know where I can aquire it?


******* ****** ******* ******** ******* ******* ******* ***
*  Read list FAQ at:
*  This email was sent to you via Structural Engineers
*  Association of Southern California (SEAOSC) server. To
*  subscribe (no fee) or UnSubscribe, please go to:
*  Questions to seaint-ad(--nospam--at) Remember, any email you
*  send to the list is public domain and may be re-posted
*  without your permission. Make sure you visit our web
*  site at:
******* ****** ****** ****** ******* ****** ****** ********