Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: Grade 8 bolt properties

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Dear,

Please, check Bolt grade is supposed to be Grasde 8.8, but not Grade 8.

Regards,

On Tue, Nov 24, 2009 at 6:56 AM, Joseph R. Grill <jrgrill(--nospam--at)cableone.net> wrote:
> Harold,
>
> Thank you for the links.
>
> Joe
>
>
>
> From: Harold Sprague [mailto:spraguehope(--nospam--at)hotmail.com]
> Sent: Monday, November 23, 2009 3:18 PM
> To: seaint(--nospam--at)seaint.org
> Subject: RE: Grade 8 bolt properties
>
>
>
> Joe,
>
> Contact the IFI regarding the MSCR.
> http://www.industrial-fasteners.org/contact_us.html
>
> You need to page through the NASA RS 1228
> http://gltrs.grc.nasa.gov/reports/1990/RP-1228.pdf
>
> It has a good section in the back regarding ASTM and SAE.
>
> Regards, Harold Sprague
>
>
>
>
> ________________________________
>
> From: jrgrill(--nospam--at)cableone.net
> To: seaint(--nospam--at)seaint.org
> Subject: Grade 8 bolt properties
> Date: Mon, 23 Nov 2009 11:22:04 -0700
>
> I am working on a small project.  Kind of a backwards design for some small
> steel brackets that are in the process of being detailed.  The drawings the
> steel detailer call for Grade 8   1/4x20 bolts.  I have found some
> information on the internet.  What I think should be called out should be
> ASTM A354 Grade BD (it appears that it is in the same category as SAE J429
> Grade 8).  It has a yield strength of 130 ksi and a tensile strength of 150
> ksi.  Am I correct?
>
>
>
> In addition, the shop drawings that are in production, call for a ¼”-20 FH
> MSCR in another application on the project.  I can see that it will be a ¼”
> flat head screw (the drawings show a countersunk part for the application
> and I believe the receiving part will be drilled and tapped.  But what does
> the “MSCR” stand for?  Sorry for the confusion here.  And, what would the
> correct ASTM designation be?  Same as above for the bolts as the table I
> found from American Fastener shows ASTM A#%$ Grade BD being for Bolts,
> Screws, and Studs.
>
>
>
> Thanks for the help
>
>
>
> Joe Grill
>
>
>
>
>
>
>
> ________________________________
>
> Hotmail: Trusted email with powerful SPAM protection. Sign up now.

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********