Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: TEKS Self-Drilling Screws

[Subject Prev][Subject Next][Thread Prev][Thread Next]
For generic self drilling screw, check the decking manufaturer's catalog or users manual. They should have the recommended fastener types and spacing along with working capacities.   

--
Milo Zabala, PE
Ausra Inc 


On Feb 17, 2010, at 4:40 PM, "Thor Tandy" <vicpeng(--nospam--at)telus.net> wrote:

I'm looking for pull-out capacities for TEKS self-drilling screws.  Their
site only gives torque loads - or do I have to calculate the capacity from
the torques?



TIA



Thor A. Tandy P.Eng, C.Eng, Struct.Eng, MIStructE
Victoria, BC
Canada 






******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ******** 



      

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********