Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: GluLam Beam Repairs

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Thanks Buddy.

Ray Shreenan


From: AWC Info <Info(--nospam--at)awc.org>
To: seaint(--nospam--at)seaint.org
Sent: Mon, September 13, 2010 9:25:16 AM
Subject: GluLam Beam Repairs

The American Institute of Timber Construction (AITC) publishes a document entitled Use of Epoxies in Repair of Structural Glued Laminated Timber(1990). It is available to download free from their website at https://www.aitc-glulam.org.

 

HTH

 

Buddy

 

John "Buddy" Showalter, P.E.
Vice President, Technology Transfer

 

American Wood Council

803 Sycolin Road, Suite 201

Leesburg, VA 20175

bshowalter(--nospam--at)awc.org

202-463-2769
www.awc.org

newAWClogofinaltextrightcaps-small

 

The American Wood Council (AWC) develops internationally recognized standards for wood design and construction. Its efforts with building codes and standards, engineering and research, and technology transfer ensure proper application for traditional and engineered wood products.

*********************
The guidance provided herein is not a formal interpretation of any AF&PA/AWC standard.  Interpretations of AF&PA/AWC standards are only available through a formal process outlined in
AF&PA's standards development procedures.

*********************

 

 

From: Raymond Shreenan <rshreenan1(--nospam--at)verizon.net>

Subject: GluLam Beam Repairs

To: seaint(--nospam--at)seaint.org

 

Hi Folks,

 

 I have a project that has Douglas Fir glulam beams supporting a wood elevated

walk way used to access condo units on upper levels.  The walk way is exposed to

the weather and has developed insect infestation and dry rot over a long period

of time.  The damage I observed so far is in small areas and not in high shear

nor bending stress zones.  Is there an acceptable wood/epoxy type filler that

will still bond if the decayed wood is routed out and the clean wood is treated

with a wood fungicide?  Also the wood beams are over sized for appearance for

the tributary  DL and LL.

 

Thanks for any help from the wood gurus out there.