Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: DOE-STD-1020 - Outdoor HVAC Equipment

[Subject Prev][Subject Next][Thread Prev][Thread Next]
David,
 
        I'm not familiar with the DOE standard; but a practical solution may be bar style floor grating.  It's readily available and relatively inexpensive.
 
Regards,
 
H. Daryl Richardson
----- Original Message -----
Sent: Monday, February 07, 2011 11:39 AM
Subject: DOE-STD-1020 - Outdoor HVAC Equipment

Need to provide wind-borne debris protection for existing outdoor HVAC equipment.  Protection is to be in accordance with DOE-STD-1020 which is pretty stringent:   15 pound 2x4 at 50 mph.

 

I've seen a test report for 3/4" 9 gauge expanded metal for ASTM E1966 - 9 pound 2x4 at 34 mph.   But that testing obviously falls short of the DOE-STD-120.

 

Has anyone worked on a project that required the DOE-STD-1020 (or similar) compliance?  If so, how was the HVAC equipment protected?

 

Thanks,

David Finley