Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: RE: Channel Spec

[Subject Prev][Subject Next][Thread Prev][Thread Next]

We still do that today with two little back to back C’s to indicate double wales on our sheet pile walls.

 

Bob G.

From: h.d.richardson [mailto:h.d.richardson(--nospam--at)shaw.ca]
Sent: Tuesday, February 22, 2011 9:17 AM
To: seaint(--nospam--at)seaint.org
Subject: Re: RE: Channel Spec

 

Thor,

 

        I've seen that format on drawings before.  Some draughtsmen with a European background used to write it that way in the days when people used hand lettering on drawings.

 

Regards,

 

H. Daryl Richardson

----- Original Message -----

To: SEAInt

Sent: Monday, February 21, 2011 11:35 PM

Subject: Re: RE: Channel Spec

 

... a rose by any other name ... I was wondering more about from whence the "U" came ...

Sent on the TELUS Mobility network with BlackBerry


Date: Mon, 21 Feb 2011 19:38:11 -0800

Subject: Re: RE: Channel Spec

 

It's a channel. "Purlin" just describes its function. If it's on the roof it's a "purlin". Same section on the wall would be a "girt".

On Feb 21, 2011 4:46 PM, "Thor Tandy" <vicpeng(--nospam--at)telus.net> wrote:
> That's what I figured but the dwgs done in 1965 show 8U11.5 but also adds
> "purlin" so I'm guessing it's a "purlin" section rather than a channel . it
> sure looks like a channel on site .
>
>
>
> From: Tripp Howard [mailto:tripphoward(--nospam--at)gmail.com]
> Sent: Monday, February 21, 2011 4:18 PM
> To: seaint(--nospam--at)seaint.org
> Subject: Re: Channel Spec
>
>
>
> Looks like a C8x11.5 (8" deep, 11.5 lbs/ft)
>
> On Mon, Feb 21, 2011 at 3:58 PM, Thor Tandy <vicpeng(--nospam--at)telus.net> wrote:
>
> Does anyone know the designation "8U11.5" as applied to a channel section?
>
>
>
> TIA
>
>
>
> Thor A. Tandy P.Eng, C.Eng, Struct.Eng, MIStructE
> Victoria, BC
> Canada
>
>
>
>
>
>
>
>
> ******* ****** ******* ******** ******* ******* ******* ***
> * Read list FAQ at: http://www.seaint.org/list_FAQ.asp
> *
> * This email was sent to you via Structural Engineers
> * Association of Southern California (SEAOSC) server. To
> * subscribe (no fee) or UnSubscribe, please go to:
> *
> * http://www.seaint.org/sealist1.asp
> *
> * Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
> * send to the list is public domain and may be re-posted
> * without your permission. Make sure you visit our web
> * site at: http://www.seaint.org
> ******* ****** ****** ****** ******* ****** ****** ********
>
>
>
>
> --
> Tripp Howard
>