Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

tolerance of sloping floors.

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Look at allowed deflections for beam designs.
The mid-span deflection is a deflection across half the span.
The slope is the greatest at the support and very much higher than the average using a maximum deflection.
L/240 allows 1.5 inches with 15 feet to mid-span.

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* * This email was sent to you via Structural Engineers * Association of Southern California (SEAOSC) server. To * subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
* Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you * send to the list is public domain and may be re-posted * without your permission. Make sure you visit our web * site at: http://www.seaint.org ******* ****** ****** ****** ******* ****** ****** ********