Need a book? Engineering books recommendations...
FTG UPLIFT[Subject Prev][Subject Next][Thread Prev][Thread Next]
- To: seaint(--nospam--at)seaint.org
- Subject: FTG UPLIFT
- From: William Haynes <gtg740p(--nospam--at)gmail.com>
- Date: Mon, 21 Nov 2011 21:26:20 -0500
I wanted to see how many are using 0.6xFTG Self Weight of the footing when checking uplift due to wind or using the entire footing weight, 1.0xFTG Self Weight to help resist uplift. There appears to be several engineers that use 0.6x(everything else dead load except the footing) + 1.0x(FTG Self Weight) to check versus 1.0xGross wind uplift. The concrete has no allowance to be lighter than what you assume, and the footings have to be consistently dug to at least the dimensions you specify on your drawings. Is there anyone involved in forensics of metal buildings that have seen the footings uplift out of the ground when the code prescribed 0.6 wasn't factored on the footing self weight?
- Prev by Subject: Re: Friction coefficient
- Next by Subject: Re: FTG UPLIFT
- Previous by thread: Bill's OT discussion
- Next by thread: Re: FTG UPLIFT