Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: Blast Door Design : Edge Rotation

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Can you please let me know how to send the image to the server? I tried
attaching the file as a pdf, the mail bounced back. I tried pasting the
image directly to the mail, it bounced back again.


On Tue, Oct 30, 2012 at 10:19 AM, Himanshu Goyal 

> Can you put up a sketch or a drawing of the structural arrangement ?
> On Tue, Oct 30, 2012 at 7:36 AM, Kapil Nandwana
> <kapil.nandwana(--nospam--at)>wrote:
>> I am performing a SDOF Dynamic Analysis per UFC-3-340-02 manual
>> (contractual requirement).
>> The design parameter are as follows:
>> Double Leaf Blast Door
>> Width = 16'
>> Height = 14.5'
>> Each Leaf can only be supported on two sides (top and side)
>> Peak Reflected Pressure = 346 psi
>> Time Duration of reflected pressure = 0.59ms
>> Using a monolithic steel plate of 1.5" thick, this is the calculated 
>> door response:

Post your message to the list by sending it to: 

The email messages sent to the list will be saved in an archive on the World Wide Web.
These archives are located at:

To contact the list owner, send your message to:

5700 Ralston Street, Suite 300, Ventura, CA 93003

To unsubscribe, switch to/from digest, get on/off vacation, or change your email address, click here.