Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: L-shaped A490 Anchor Bolts

[Subject Prev][Subject Next][Thread Prev][Thread Next]
If there's one guy who should appreciate the change in nomenclature, I 
would think it would be Rod.

I appreciate the discussion, particularly Bill's comment about the CG 
causing the rods to lean. Thanks Bill.

Dan Popp, S.E.

________________________________
 From: Rod Tayong <rtayong(--nospam--at)yahoo.com>
To: seaint-seaosc(--nospam--at)mail-list.com
Sent: Thursday, May 2, 2013 9:35 AM
Subject: Re: [SEAINT-SEAOSC] L-shaped A490 Anchor Bolts

Thanks for all the replies citing the specs and the cons on using shaped
anchor bolts. It's well explained.

Regards,

Rod Tayong

________________________________
From: "Polhemus, William" <wpolhemus(--nospam--at)craworld.com>
To: seaint-seaosc(--nospam--at)mail-list.com
Sent: Thursday, May 2, 2013 4:37 PM
Subject: Re: [SEAINT-SEAOSC] L-shaped A490 Anchor Bolts

The biggest problem is their cg causes them to lean off vertical unless
they're tied firmly in place. Tacking a nut at the bottom of a straight rod
eliminates that.

William L. Polhemus, Jr. P.E.

5

Truncated 575 characters in the previous message to save energy.

-------------------------------------------------------------------------
Post your message to the list by sending it to: 
   SEAINT-SEAOSC(--nospam--at)mail-list.com.

The email messages sent to the list will be saved in an archive on the World Wide Web.
These archives are located at:
    http://archive.mail-list.com/SEAINT-SEAOSC

To contact the list owner, send your message to:
   SEAINT-SEAOSC-list-owner(--nospam--at)mail-list.com.

Sponsored By: Pacific Structural & Forensic Engineers Group, Inc. (PSFEG)

To unsubscribe, switch to/from digest, get on/off vacation, or change your email address, click here.
<http://cgi.mail-list.com/u?ln=seaint-seaosc&nm=seaintma%40euken.net>