Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: Anchor Rods

[Subject Prev][Subject Next][Thread Prev][Thread Next]
I have a copy of F1554-07a. This is the only thing said about LENGTH:

10.4 Length:
10.4.1 The overall length of straight anchor bolts, or length
to the inside of the hook, shall be the specified length +/-1⁄2 in.
(13 mm) for lengths 24 in. (600 mm) or less, and +/-1 in. (25
mm) for longer bolts.
10.4.2 The length of hooks shall be the specified length,
+/-10 % of the specified hook length, or +/-1⁄2 in. (13 mm),
whichever is greater.

There appears to be no limit on ordered length for anchor rods under this 
specification, only specified length tolerance.

-----Original Message-----
From: seaint-seaosc(--nospam--at) [mailto:seaint-seaosc(--nospam--at)] On 
Behalf Of Joe Venuti Sent: Wednesday, June 12, 2013 6:55 PM
To: seaint-seaosc(--nospam--at)
Subject: [SEAINT-SEAOSC] Anchor Rods

Hello All

In the Anchor Rod spec F1554 does it cover threaded rods up to 4ft long or 
is that a different spec ?

I use to use A307 callout for all thread rods of various lengths.

Joe Venuti

Joven Engineering

P.O. Box 5098

La Quinta,  CA  92248-5098

760 408-6441

 <mailto:jovenengr(--nospam--at)> jovenengr(--nospam--at)

Post your message to the list by sending it to: 

The email messages sent to the list will be saved in an archive on the World Wide Web.
These archives are located at:

To contact the list owner, send your message to:

Sponsored By: Pacific Structural & Forensic Engineers Group, Inc. (PSFEG)

To unsubscribe, switch to/from digest, get on/off vacation, or change your email address, click here.