Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: Repair of Glulam Beams

[Subject Prev][Subject Next][Thread Prev][Thread Next]
I should have thought of that ... thanks.  Good starting point.

-----Original Message-----
From: seaint-seaosc(--nospam--at)mail-list.com [mailto:seaint-seaosc(--nospam--at)mail-list.com] On 
Behalf Of IRV FRUCHTMAN Sent: February-28-14 1:29 PM
To: seaint-seaosc(--nospam--at)mail-list.com
Subject: Re: [SEAINT-SEAOSC] Repair of Glulam Beams

Thor,
You might look at AITC Tech Note 14
Irv

On Friday, February 28, 2014 3:21 PM, Thor Tandy <vicpeng(--nospam--at)telus.net> wrote:

1)      I have a repair project that has glulams that have been exposed to
> weather for the last 15 years or so.  No marks for guessing what
> happened.
> 2)      The degradation is at bracket locations which were not flashed to
> protect.
> 
> 3)      Deconstruction is not easily attempted due the original
> construction order.
> 
> 4)      The first thought was to simply remove degraded material as best
> as possible and replace with similar lamination material and adhesives.
> 
> I have seen this/similar question posed in previous posts but don't
> have a record of the responses.

-------------------------------------------------------------------------
Post your message to the list by sending it to: 
   SEAINT-SEAOSC(--nospam--at)mail-list.com.

The email messages sent to the list will be saved in an archive on the World Wide Web.
These archives are located at:
    http://archive.mail-list.com/SEAINT-SEAOSC

To contact the list owner, send your message to:
   SEAINT-SEAOSC-list-owner(--nospam--at)mail-list.com.

Sponsored By: Pacific Structural & Forensic Engineers Group, Inc. (PSFEG)

To unsubscribe, switch to/from digest, get on/off vacation, or change your email address, click here.
<http://cgi.mail-list.com/u?ln=seaint-seaosc&nm=seaintma%40euken.net>